Wayne Corrosion-Resistant Thermoplastic Condensate Removal Pump 120V ac 85 GPH 1/10 HP

Wayne WCP85 is a condensate pump that transfers condensation from the air conditioner and HVAC system to the nearest drain point. The HVAC condensate pump has a maximum flow rate of 150 gallons per hour at 0 feet of discharge lift. Wayne condensate pump has 3/8 inches discharge with a built-in check valve with a 2-quart reinforced thermoplastic reservoir. This condensate removal pump also has high-water protection switches to shut off the HVAC system. A durable, corrosion-resistant stainless steel shaft magnifies the worth of this replacement pump. The AC pump also boasts a corrosion-resistant, thermoplastic construction. This AC condensate pump is designed for easy installation in new or existing applications. CSA compliant and UL listed, the quality of this AC condensate removal pump is incredible. Use the thermoplastic condensate pump for water-moving tasks around the home. This gasoline-powered air conditioning pump is also ideal for more probable farm and commercial uses.

• UPC: 040066211101
• Manufacturer Part No: WCP85

• Brand Name: Wayne
• Product Type: Condensate Removal Pump
• Housing Material: Thermoplastic
• Horsepower: 1/10 hp
• SSPMA Certified: No
• Packaging Type: Boxed
• Pump Switch Type: Switchless
• Self Priming: Yes
• Float Switch: No
• Hardware Included: Yes
• Inlet Diameter: 3/8 in.
• Maximum Discharge Flow: 82 gph
• UL Listed: Yes
• Submersible: No
• Corrosion Resistant: Yes
• Cord Length: 0 ft.
• Width: 10.50
• Power Source: Manual
• Maximum Feet of Head: 18
• Depth: 5.50
• Discharge Pipe Size: Not Available
• CSA Listed: Yes
• Height: 5.50
• Maximum Temperature: 40
• Minimum Temperature: 110
• 150 gallons per hour at 0ft. of discharge lift
• Durable
• 3/8" discharge with built in check valve with 2 quarter reinforced thermoplastic reservoir
• Gasoline powered pumps are for more proable farm and commerical uses
• Maximum Temperature: 40 deg. F
• Power Source: AC
• Self Priming: Self-Priming
• Volts: 120 volt
• Maximum Discharge Flow: 85 gph
• Discharge Flow at 10 ft.: 52
• Discharge Flow at 20 ft.: 0
• Maximum Temperature: 110 deg. F
• Discharge Flow at 15 ft.: 31
• Agency Compliance: CSA
• Minimum Temperature: 40 deg. F
• On/Off Operations: Manual
• Discharge Flow at 15 ft.: 31 gph
• Discharge Flow at 10 ft.: 52 gph
• Discharge Flow at 20 ft.: 0 gph
• Maximum Feet of Head: 18 ft.
• Discharge Flow at 15 ft.: 30
• Maximum Feet of Head: 15
• Discharge Pipe Size: 3/8 inch
• Maximum Feet of Head: 18 feet
• Discharge Flow at 15 ft.: 30 gph
• Horsepower: 1/10 HP
• Powered By: AC
• Discharge Flow at 10 ft.: 52 gph gph
• Discharge Flow at 20 ft.: 0 gph gph
• Discharge Flow at 15 ft.: 30 gph gph
• Maximum Feet of Head: 18 feet ft.
• Minimum Temperature: 40 °F
• Maximum Temperature: 110 °F
• Volts: 120 V
• Discharge Pipe Size: 3/8 inch in.