Tuhorse 3" 1 HP Submersible Well Pump Complete Set Incl Motor, Pump-end and Control Box. 280ft Maxhead, Rated 10gpm, 14gpm Max. 1-phase 230v, 60Hz, 3420 rpm, 1 Year Warranty, (TH3-010-18).

If you had a hard time pulling your old 4 inch pump out of the well because the 4" steel well casing is rusted or the PVC casing is melted, consider to use a 3" pump instead. This pump is also an ideal replacement for your jet pump. Go green, tired of priming your jet pump? get rid of your jet pump and use this higher efficient submersible! This complete submersible well pump set includes a 18 stage pump-end, a 1HP heavy duty oil cooled submersible motor, and a dual capacitor metal cased control box equipped with a motor overload protector. Flow at typical depth: 14GPM at 115ft., 12GPM at 160ft., 9GPM at 210ft., 5.3GPM at 253ft. Connector terminal inside the control box accepts up to AWG #6 wire. This pump runs on 230V, 60Hz, Single Phase Power, and the motor uses 3 wires + 1 ground wire. Net weight 28Lb.(13Kg); Net length: 42” (1050mm). 1 year warranty. external check valve(not included) is required in a water tight system but is not required for free flow applications.

• Just slightly under 3” diameter, fits 3-1/4" I.D. and larger wells
• 1 inch NPT stainless steel outlet (discharge)
• 18 Stages. Cut off head 280 feet. Max flow(0 - 115 feet): 14GPM, rated 10GPM
• Metal cased control box includes a 50uF start and 20uF run capacitor
• Meets NEMA industrial standards, manufactured under ISO 9001:2000, conforms to IEC34-ICE standards.