ssontong Upgraded OBD2 OBD Power Cable for Dash Camera, OBD to Type-C USB OBDII Adapter Hardwire Charger Cable 24 Hours Surveillance and Acc Two Mode with Switch Button (Type-C USB Port)

Technical Specifications: ACC mode Input: 13V-36V | Output: 5V/3A Surveillance mode Input: 11.6V-36V | Output: 5V/3A Extension cable: 3.5meters(11.5 ft) length Interface: TYPE C USB (obd power adapter usb c) One button for Two work modes: Mode “O”: ACC mode: When your car ACC is off, the OBD power cable will also power off after 20 minutes. Mode “—”: Surveillance mode: When you car ACC is off, the OBD power cable will keep working until detecting the car battery voltage is at 11.6V(low voltage), it will power off after 30 seconds The low voltage protection for mode “—” protect your car from running out the battery, enable you have enough voltage to start the car for next driving. Attention: 1.Please note that the car OBD, OBD2 power cable is only working for dash cams which range from 8V-36V,other voltage range is not supported. The voltage will be converted to 5V output. 2.This car charger adapter is suitable for 16pin OBD and OBD2 ports. It is only used for charging.

• ★Dash cam obd power cable is suitable for all type-c port electronic devices. Before purchasing, please confirm if the signal definition foot of your dash cam is A5-B5. If not, this OBD Power Cable does not support your dash cam. If you don't know what the signal definition foot of your dashcam is, you can first consult the seller who purchased the camera
• ★Low Voltage Protecting OBD Power Adapter USB C: OBD2 dash cam power cable, which has a built-in intelligent program control chip with automatic battery voltage detection and low voltage protection, automatically cutting off the power output when the battery voltage is below 11.6V to ensure the vehicle can start normally. For vehicles with aging batteries or inconsistent voltage output, this protection mechanism will be immediately triggered. Therefore, this automatic power cut-off is not due to the OBD power cable not working, but rather due to the low voltage in your car. You need to check the voltage of your car.
• ★High Compatibility OBD Power Adapter for Dash Cam: OBD power cable for dash camera, Jeep Cherokee, Chevy, Toyota, Truck, etc. as long as you have OBD port. Specially designed for dash cam GPS navigator, DVR, radar detector and more Type-c usb port devices. It is type c obd power, please note it! This OBD power cable is a voltage detection solution and is only suitable for fuel vehicles. For hybrid and pure electric vehicles, please purchase ASIN: B0DJQWNZDW, which is suitable for vibration detection solutions.
• ★OBD Power Cable for Dash Cam Have Two Work Modes: One button operation for two work modes. 1, ACC mode, the obd power cable type c will power off after 5 minutes when your car ACC is off. 2, Surveillance working mode, keep working until it detects low battery voltage (11.6V), realize 24 hours parking monitoring. The "O" gear requires a delay of 20 minutes when car voltage is lower than 12.9V (±0.2) before powering off. The "O" gear requires a 5-minute delay when car voltage is lower than 11.6V.
• In the case of no power supply -1: "O" mode, the starting voltage for this mode is 12.9V (± 0.2). Please check if the charging plug and OBD power outlet are securely plugged in. 2: Check if the car voltage reaches 13.1V after starting. The situation of continuous power supply -1: In the "O" mode, the low voltage protection voltage in this mode is 12.9V (± 0.2). Please check the situation of continuous power supply. 1: Check whether the car voltage drops quickly to 12.7V after turning off the engine. When the voltage reaches 12.7V, it will take another 20 minutes to turn off the voltage.
• ★Only for Charging OBD Power Connector: Obtaining power from OBD interface only, no interference in other OBD data communication. Don't hesitate to buy it, we provide 100% satisfactory after-sales service. If you have any questions, please feel free to contact us, we will replace or issue a quick refund for you for free!
• ★Universal OBD and OBD2 Power Adapter: The obd2 obd power cable for dash camera plugs into your car stock OBD or OBD2 port directly. You don't need to take power from car battery or fuse box and cigarette lighters. This obd power cable provides you more security and convenience.