Shurtape PC-667 Specialty Grade Stucco Masking Duct Tape: 2 in x 60 yds. (Red)

<p><b>Shurtape PC-667 Specialty Grade Stucco Masking Duct Tape</b> is a UV-resistant red cloth duct tape used for protective masking of non-painted surfaces of various materials such as steel, vinyl, aluminum, and anodized metals. Shurtape PC 667 is used in plastering, stucco, concrete, pools, tile and synthetic surfaces when UV resistance is required. It features clean removal (no residue) after 14 days exposure; a waterproof backing; high tack; and easy tearing. PC 667 comes with Shurtape's Polyblended CO-EX technology with is a co-extrusion process which melds polyethylene, cloth and adhesive in a single, high-temperature step which results in a permanent, airtight bond (creates added strength which will not delaminate). Made in the U.S.</p> NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 55m. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.<br><br><b>Technical Information</b><br>- Core: 3 inch diameter <br>- Backing/Carrier: polyethylene film with a polyester cloth carrier <br>- Adhesive: synthetic/natural rubber (blended) <br>- Thickness: 9 mils (carrier, adhesive) <br>- Adhesion: 50 ounces per inch (to stainless steel test panel) <br>- Tensile Strength: 22 pounds per inch (longitudinal) <br>- Service/Operating Temperature: 50F to 200F <br>- Elongation: 15 % <br>

• Shurtape PC-667 Specialty Grade Stucco Masking Duct Tape is a UV-resistant red cloth duct tape used for protective masking of non-painted surfaces of various materials such as steel, vinyl, aluminum, and anodized metals.
• Shurtape PC 667 is used in plastering, stucco, concrete, pools, tile and synthetic surfaces when UV resistance is required.
• It features clean removal (no residue) after 14 days exposure; a waterproof backing; high tack; and easy tearing.
• PC 667 comes with Shurtape's Polyblended CO-EX technology with is a co-extrusion process which melds polyethylene, cloth, and adhesive in a single, high-temperature step which results in a permanent, airtight bond (creates added strength which will not delaminate).
• Carrier/Backing: polyethylene film with a polyester cloth carrier. Adhesive: synthetic/natural rubber (blended). Thickness: 9 mils (carrier, adhesive). Adhesion: 50 ounces per inch (to stainless steel test panel). Tensile Strength: 22 pounds per inch (longitudinal). Service/Operating Temperature: 50F to 200F. Elongation: 15%. Core: 3-inch diameter.