Shurtape FP-227 Flatback Paper Tape: 2 in x 60 yds. (White)

<p><b>Shurtape FP-227 Flatback Paper Tape</b> is a printable flatback Kraft paper which offers clean removal adhesive properties. It is well-suited for full-web flexographic printing equipment or hand labeling applications. Shurtape FP 227 offers higher adhesion than most artist console tapes.</p> <b>Uses &amp; Applications</b><br> <ul> <li>Marking &amp; Labeling</li> <li>Color coding &amp; Identification</li> <li>Holding, Banding, Bundling &amp; Binding</li> <li>Splicing</li> <li>Decoration, Arts &amp; Crafts</li> <li>Other Manufacturing&amp; Industrial</li> </ul> <b>Features &amp; Benefits</b><br> <ul> <li>Excellent printability</li> <li>Adhesive system designed for excellent performance and adhesion to a variety of substrates</li> <li>Flexible</li> <li>Resists abrasion, oil and staining</li> </ul> Made in the U.S. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.<br><br><b>Technical Information</b><br>- Core: 3 inch diameter <br>- Backing/Carrier: flatback paper <br>- Adhesive: rubber-based <br>- Standards Met: ASTM D 6123/D 6123M-97 (2012), Type II, ASTM D-4236 (all except fluorescents) <br>- Thickness: 5.8 mils (carrier, adhesive) <br>- Adhesion: 57 ounces per inch (to stainless steel test panel) <br>- Tensile Strength: 30 pounds per inch (longitudinal) <br>- Service/Operating Temperature: 40F to 150F <br>- Elongation: 2.5 % <br>

• Carrier/Backing: flatback paper. Adhesive: rubber-based.
• Thickness: 5.8 mils (carrier, adhesive). Elongation: 2.5%.
• Adhesion: 57 ounces per inch (to stainless steel test panel). Tensile Strength: 30 pounds per inch (longitudinal).
• Service/Operating Temperature: 40F to 150F
• Certifications: ASTM D 6123/D 6123M-97 (2012), Type II, ASTM D-4236 (all except fluorescents). Core: 3 inch diameter.