S&F STEAD & FAST Annular Cutter, 1-1/16" Cutting Diameter x 1" Depth of Cut for Magnetic Drill Press, Drill Bit Cutter, Mag Drill Bits with Pilot Pin
Product details
| Management number | 239531965 | Release Date | 2026/07/14 | List Price | US$16.40 | Model Number | 239531965 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
- Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life
- HSS annular drill bit with Outside Diameter 1-1/16 inch with 1 inch cutting depth
- CNC-machined high precision drill bit cutter with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results
- IMPORTANT Drill single layers of materials only. This series of annular cutter is NOT designed for drilling of multiple layers.
- Avoid premature failure of cutter by using a low feed rate when engaging the bit with the work piece, especially for the smaller cutters. Increase to recommended rate once bit is about 2-3mm in.
- Secure workpiece firmly before drilling. If workpiece is less than 1/2” thick, use a 3/8” steel sheet under it to ensure the magnetic drill will grip it firmly. There should be no movement between the workpiece and bit during drilling.
- Compatible with various brands of mag drill including Alfra, BDS, Dewalt, Fein, Euroboor, Hougen, Ruko. Caution: if you want to use this annular cutter on a drill press, you need an extra annular cutter arbor. Arbor is not included in this pack
- Sturdy plastic case holding one annular cutter, one pilot pin
| ASIN | B096VM5DF4 |
|---|---|
| Model | ZXT-HAZ-013 |
| Brand Name | S&F STEAD & FAST |
| Shank Type | Weldon |
| Unit Count | 1 Count |
| Item Weight | 4.5 Ounces |
| Part Number | ZXT-HAZ-013 |
| Finish Types | Uncoated |
| Manufacturer | S&F STEAD & FAST |
| Material Type | High Speed Steel (HSS) |
| Item Dimensions | 2.44 x 1.06 x 2.44 inches |
| Tool Flute Type | Spiral |
| Cutting Diameter | 1.06 Inches |
| Number of Flutes | 8 |
| Number of Pieces | 3 |
| Included Components | Pilot Pin |
| Minimum Bore Diameter | 1 Inches |
| Surface Recommendation | Metal |
Bestseller ranking
Milkshake Syrups
Customers who viewed this product also viewed
Annular Cutters
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form