Renogy Flexible Solar Panel 100 Watt 12 Volt Monocrystalline Semi-Flexible Bendable Mono Off-Grid Charger for Marine RV Cabin Van Car Uneven Surfaces

Traditional solar panels are rigid and often enclosed in tempered glass. The Renogy 100W Flexible Solar Panel is anything but traditional. Perfect for marine use or placement on top of a van or vehicle, the Renogy 100W Lightweight Solar Panel is thin and capable of flexing up to 248 degrees. At 4 pounds, this flexible solar panel weighs only a quarter of its traditional 100W counterpart. Highly flexible, this lightweight panel can easily be installed on curved surfaces. This panel can also be used for other various applications, including providing power on a boat or teardrop trailer.

• - Renogy 100W Flexible Solar Panel - The bendable solar panels can bend up to 240 degrees, which allows the panel to be mounted on curved surfaces. They’re designed to minimize mounting issues associated with curved surfaces. Weighing only 5.3 lb, this lightweight flexible panel is 75% lighter than its rigid counterpart. Travel light with solar, embrace possibilities. It's only 0.1 inch thick!A stunning 95% thinner than its rigid counterpart. Sleek and unobtrusive, they’re the perfect solar panels for RVs, boats, and other scenarios. All Renogy 100 watt flexible solar panels adopt PERC cells, Half-Cell cut, advancing lamination structure, and 9 Busbars technology to ensure stable and reliable performance. Provide an extended period of work time without damage. Rigorously tested, Renogy flexible solar panels can withstand extreme winds of up to 2400 Pa and snow loads of up to 5400 Pa. Fearless of extreme climates, backup your brave journey. This panel has six metal reinforced mounting holes, making installation simple and easy comparing to other bendable solar panels. You can also mount it using silicone adhesive or even Velcro, so they can be placed in the sun when your vehicle is parked in the shade.
• - FREQUENTLY BOUGHT TOGETHER -
  
  
  Renogy New Edition Voyager 20A PWM Solar Charge Controller  
  
  Renogy 700W1000W/2000W/3000W 12V Pure Sine Wave off Grid Solar Home Use Solar Inverter  
  
   
• Specifications
  
  Maximum Power at STC: 100 W
  
  Optimum Operating Voltage (Vmp): 20.7 V
  
  Optimum Operating Current (Imp): 4.84 A
  
  Open-Circuit Voltage (Voc): 24.4 V
  
  Short-Circuit Current (Isc): 5.16 A
  
  Maximum System Voltage: 600 VDC (UL)
  
  Maximum Series Fuse Rating: 15 A
  
  Module Efficiency: 0.157201560697095
  
  Operating Temperature: -40℃—80℃
  
  Dimensions: 1093 x 582 x 3 mm (43.0 x 22.9 x 0.1 in)
  
  Weight: 2.4 kg  / 5.3 lb
  
  Output Leads (Pair): 12 AWG (27.6 ft)
  
  
  
  Package Includes
  
• - FREQUENTLY BOUGHT TOGETHER -
• Maximum Power at STC: 100 W Optimum Operating Voltage (Vmp): 20.7 V Optimum Operating Current (Imp): 4.84 A Open-Circuit Voltage (Voc): 24.4 V Short-Circuit Current (Isc): 5.16 A Maximum System Voltage: 600 VDC (UL) Maximum Series Fuse Rating: 15 A Module Efficiency: 0.157201560697095 Operating Temperature: -40℃—80℃ Dimensions: 1093 x 582 x 3 mm (43.0 x 22.9 x 0.1 in) Weight: 2.4 kg / 5.3 lb Output Leads (Pair): 12 AWG (27.6 ft)
• 1. - What do I need to complete my off-grid solar power system ? - A solar panel has to be connected a charge controller to regulate current, and a battery to store the electrical power. You will need adapter kit cables to wire the solar panel(s) and charge controller, and tray cables connecting the charge controller to a deep-cycle battery. 2. - Why is my solar panel under producing ? - Solar panel performance may be hindered for a number of reasons. Most commonly environmental conditions such as indirect sunlight, temperature rise, cloudy sky, and dirt and stain build up on the top glass will cause a reduced power output. 3. - How should I connect solar panels in my electrical circuit (series vs parallel) - It depends on your electrical circuit size and power demand. Connecting solar panels in series: add up their operating voltage output, while system current output will be the same as that for one panel. Connecting solar panels in parallel: individual panels operating current output add up to the system output current, while system output voltage will be the same as of one solar panel. To meet the optimum power output and system rating for your power system, you can use both parallel and series connections. 4. - How many solar panels do I need ? - The best way to gauge how many solar panels you need, is to understand and define the power load needed from this system. Power is measured in Watts, and capacity is commonly measured in Watt-hours (multiplying power output in watts by the required number of hours of operation multiplied by a safety factor of 1.5-2). Therefore, it is wise to size your battery bank first based on the minimum required capacity, and accordingly decide how many panels or how much power input is needed. 5. - Can I walk on flexible solar panels? - We suggest not. Walking on solar panels will exert excessive pressure on the small area, it may cause cracks and damage to the panel. 6. - How to clean solar panels? - You can clean the panels with a non-abrasive sponge and water. We suggest regular maintenance to wipe the dust, sand, and other dirts away. Built-up dirt and stain will reduce the power output of the panel.