Patco Preservation & Sealing Tape [UV Resistant] (5400): 1 in. x 36 yds. (White)

<p><b>Patco 5400 Preservation &amp; Sealing Tape</b> is a film tape which combines a heavy-duty, weather-resistant polyethylene backing with a non-staining, clean removal, rubber-based adhesive. Patco 5400 is UV and weather resistant as well as highly conformable (adheres snugly to contoured and irregular surfaces). It is used for long term preservation, sealing, and splicing applications. Also for direct protective masking on aircraft, trucks, boats, and industrial equipment during outdoor storage. It can be used in conjunction with outdoor shrink film to secure and seal the shrink film border firmly during transportation or extended outdoor exposure. It is designed to not leave adhesive residue, stains, or ghosting on most surfaces. Excellent low temperature operating adhesion. Made in the U.S.</p> NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 24mm x 108 ft. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.<br><br><b>Technical Information</b><br>- Core: 3 inch diameter <br>- Backing/Carrier: UV stabilized LDPE film <br>- Adhesive: rubber <br>- Thickness: 9 mils (carrier, adhesive) 7.5 mils (carrier) <br>- Adhesion: 34 ounces per inch (to stainless steel test panel) <br>- Tensile Strength: 17 pounds per inch (longitudinal) <br>- Application Temperature: 50F to 120F <br>- Service/Operating Temperature: -40F to 200F <br>- Elongation: 500 % <br>

• Patco 5400 Preservation & Sealing Tape is a film tape which combines a heavy-duty, weather-resistant polyethylene backing with a non-staining, clean removal, rubber-based adhesive. Patco 5400 is UV and weather resistant as well as highly conformable (adheres snugly to contoured and irregular surfaces).
• It is used for long term preservation, sealing, and splicing applications. Also for direct protective masking on aircraft, trucks, boats, and industrial equipment during outdoor storage. It can be used in conjunction with outdoor shrink film to secure and seal the shrink film border firmly during transportation or extended outdoor exposure.
• It is designed to not leave adhesive residue, stains, or ghosting on most surfaces. Excellent low temperature operating adhesion.
• Carrier/Backing: UV stabilized LDPE film. Adhesive: rubber. Thickness: 9 mils (carrier, adhesive) 7.5 mils (carrier).
• Adhesion: 34 ounces per inch (to stainless steel test panel). Tensile Strength: 17 pounds per inch (longitudinal). Service/Operating Temperature: -40F to 200F. Application Temperature: 50F to 120F. Elongation: 500%. Core: 3-inch diameter.