2 Pack Cargo Base Kit OEM 860201806 Replacement Brackets Compatible With Ski-Doo REV Gen4 Snowmobile Sea-Doo Jet Ski, Mounting Bases with Complete Hardware Screws Nuts Torx Wrench

Included Components : 2 x heavy-duty base brackets 4 x black mounting bolts 4 x threaded studs 1 x Torx wrench Important Notes & Tips : 1.Thoroughly clear snow, ice and dirt from tunnel mounting positions before installation to avoid loose brackets from vibration 2.Tighten bolts evenly crosswise with the included Torx wrench; do not over-torque fasteners to prevent cracking plastic base brackets or damaging snowmobile tunnel surface 3.After mounting the two bases, test snap-in of your cargo bag/rack to ensure tight locking without wobble before riding 4.Store all spare hardware in a dry place after installation to avoid loss for future accessory swaps We have more model of product which compatible with Sea-Doo Jet Skis are still developing. Ref # 292002113 529036026 295100909 295100835 295100732 295101073 860201806 715008044 295100858 264000133 277001874 277001741 295100698 295101015 295100642 277002327 295100923 295100710 271002228 269801151 295100789 278003821 277001946 277001958 291003880 291006387 295500411 278002199 295100578 295100935 295101230 ...

• Specifications : Dimensions : 9.0*7.0*5.0cm/3.5*2.8*2.0in (whole body) + 5.5*2.5cm/2.2*1.0in (lock hole) ; Weight : 216g/0.48lb/pcs
• This cargo base kit is direct OEM replacement for part number 860201806, fully compatible with Ski-Doo REV Gen4 platform models including Summit, Grand Touring, Expedition, Renegade, MXZ series snowmobiles. Matches factory mounting hole spacing precisely, no cutting, drilling or modification required to your snowmobile tunnel deck. Works perfectly with all LinQ system accessories: cargo bags, fuel caddy, tool boxes, snowboard rack
• Package contains 2 heavy-duty base brackets, 4 black mounting bolts, 4 threaded studs and 1 Torx wrench for quick assembly. No need to source separate fasteners; every fitting you need for full installation is included in the set, saving your time and extra purchase cost
• Pre-drilled factory alignment holes for direct bolt-on mounting to your snowmobile tunnel. With the included Torx wrench, finish full installation within 10 minutes. Once installed, you can snap on/off all cargo accessories in seconds without extra tools, flexible to swap luggage racks, storage bags or fuel holders anytime during your trip
• What You Get : 2 x heavy-duty base brackets, 4 x black mounting bolts, 4 x threaded studs and 1 x Torx wrench